Skip to content

Headless Mode#

Headless mode can be used to use a device without a screen and buttons.

Setup Headless Mode#

  • Connect over serial to the device more information here
  • Connect to WiFi by sending command wifi add NetworkName Password
  • Launch the WebUI by sending command webui

If you type info then it will show you the IP address the device has been assigned. This IP address can be used in a web browser to connect to the WebUI.

Other serial commands are documented here

You might then want to use the WebUI Navigator to enable:

  • WiFi at Startup - Config -> Startup WiFi
  • WebUI at Startup - Config -> Startup App -> WebUI